Bambu Lab ABS Red 3D Printing Filament 1KG

Bambu Lab ABS Red 3D Printing Filament 1KG Bambu Lab بسعر 36,000 د.ع والدفع عند الاستلام. متوفّر الآن في جوة السوگ مع توصيل لكل محافظات العراق. (Printing Filament)

Material & Mechanical Engineering

Material Type: Premium Formulated Acrylonitrile Butadiene Styrene (ABS)
Key Optimization: Engineered to minimize warping, shrinking, and cracking compared to generic industrial ABS, offering superior structural stability and dimensional accuracy.
Impact & Heat Resistance: Exceptional impact toughness and high mechanical durability, making it ideal for functional engineering prototypes and stress-bearing mechanical parts.
Post-Processing: Highly receptive to sanding, painting, and chemical vapor smoothing (Acetone smoothing) for a perfectly glossy surface finish.

Physical & Mechanical Properties

Filament Diameter: 1.75 mm
Dimensional Tolerance: ±0.03 mm
Net Filament Weight: 1.0 kg (2.2 lbs)
Density: 1.05 g/cm³
Tensile Strength (X-Y): 37 ± 3 MPa
Bending Strength (X-Y): 67 ± 4 MPa
Impact Strength (XY-Toughness): 17.5 ± 1.6 kJ/m²
Heat Deflection Temperature (HDT): 87 °C (At 0.45 MPa)

Recommended Printing Parameters

Nozzle (Extrusion) Temperature: 240 °C - 270 °C (Recommended baseline: 250 °C - 260 °C)
Heated Bed Temperature: 90 °C - 100 °C (High bed heat is mandatory)
Chamber Temperature: Enclosed printing chamber required (Active or passive heat retaining environment)
Recommended Printing Speed: Max 200 - 250 mm/s
Compatible Build Surfaces: Textured PEI Plate, Smooth PEI Plate, High Temperature Plate (Bambu Liquid Glue/Glue Stick recommended as a release agent/adhesion helper)

Hardware Compatibility & Eco-System

Package Type: Full Spool Package (Includes 1 x Genuine Bambu Reusable Spool made of high-temperature resistant ABS up to 70 °C)
Smart Detection: Built-in active RFID chip automatically syncs exact color, material profile, and optimized speed settings with Bambu Lab AMS systems upon loading.
Air Filtration: Enclosed carbon-activated or HEPA filtration system is highly recommended due to VOC emissions during printing.

Storage & Drying Guidelines

Moisture Sensitivity: High (Absorbs ambient moisture leading to brittle prints and severe popping/stringing)
Drying Requirements: Blast drying oven at 80 °C for 8 hours, or Bambu X1/P1 series heatbed at 90 - 100 °C for 12 hours.