Bambu Lab فیلامێنتی چاپی سێ‌ڕەهەندی PETG HF سوور 1KG

Bambu Lab فیلامێنتی چاپی سێ‌ڕەهەندی PETG HF سوور 1KG Bambu Lab بە ئۆنلاین لە عێراق داوا بکە بە باشترین نرخ 32,000 د.ع. ئێستا بەردەستە، لەگەڵ پارەدان لە کاتی وەرگرتن بۆ هەموو پارێزگایەک.

Material & Printing Characteristics

Material Type: High-Flow Polyethylene Terephthalate Glycol-Modified (PETG HF)
Key Optimization: Engineered for ultra-high-speed FDM printing, offering up to 2x faster printing speeds than standard PETG without sacrificing interlayer adhesion
Surface Finish: Premium matte-to-semi-matte appearance (significantly reduces the harsh gloss, uneven shiny patches, and stringing common in traditional PETG)
Flow Performance: High volumetric flow rate and customized thermal behavior for rapid melting and crisp solidification

Physical & Mechanical Properties

Filament Diameter: 1.75 mm
Dimensional Tolerance: ±0.03 mm
Net Filament Weight: 1.0 kg (2.2 lbs)
Density: 1.25 g/cm³
Tensile Strength (X-Y): 45 MPa
Bending Strength (X-Y): 68 MPa
Impact Strength (IZOD): 5.8 kJ/m²
Heat Deflection Temperature: 68 °C (at 0.45 MPa)

Recommended Printing Parameters

Nozzle (Extrusion) Temperature: 240 °C - 270 °C (Recommended baseline: 250 °C)
Heated Bed Temperature: 65 °C - 75 °C
Max Printing Speed: Supported up to 250 - 300 mm/s (Optimized for modern high-acceleration CoreXY printers)
Compatible Build Surfaces: Textured PEI Plate, Smooth PEI Plate, High Temperature Plate (Adhesion helper/glue recommended on smooth plates to prevent over-adhesion)

Spool & Packaging Specifications

Package Type: Eco-Friendly Refill (Filament coil wrapped; designed to be easily loaded onto a Bambu Reusable Spool)
Smart Detection: Equipped with an active Bambu RFID Tag for automatic filament, color, and parameter configuration on AMS systems
Winding: Full mechanical precision neat winding to ensure tangle-free feeding

Storage & Drying Guidelines

Moisture Sensitivity: High (PETG absorbs ambient humidity rapidly, which can lead to stringing or oozing)
Drying Requirements: Blast drying oven at 65 °C for 8 hours, or X1/P1 series heatbed at 75 - 80 °C for 12 hours