Bambu Lab فیلامێنتی چاپی سێ‌ڕەهەندی PLA ئاوریشمی گوڵە سووری زێڕین 1KG

Bambu Lab فیلامێنتی چاپی سێ‌ڕەهەندی PLA ئاوریشمی گوڵە سووری زێڕین 1KG Bambu Lab لە جوة السوك بکڕە بە 32,000 د.ع لە عێراق — ئەسڵی، پارەدان لە کاتی وەرگرتن و گەیاندنی خێرا بۆ هەموو شوێنێک.

Material & Multi-Color Aesthetics

Material Type: Co-Extruded Premium Silk Polylactic Acid (PLA Silk Multi-Color)
Color Architecture: Multi-color co-extrusion blend (Combines 2 or 3 distinct color strands within a single filament filament for multi-tonal, dynamic shade shifts depending on the viewing angle)
Visual Finish: High-gloss, luxury silk-like metallic sheen with smooth gloss transitions
Layer Concealment: High (The blending colors and specular silk reflections effectively blend and mask visible layer lines)

Physical & Mechanical Properties

Filament Diameter: 1.75 mm
Dimensional Tolerance: ±0.03 mm
Net Filament Weight: 1.0 kg (2.2 lbs)
Density: 1.25 g/cm³
Tensile Strength (X-Y): 38 ± 3 MPa
Bending Strength (X-Y): 69 ± 4 MPa
Impact Strength (XY-Toughness): 22.1 ± 1.8 kJ/m²
Heat Deflection Temperature (HDT): 53 °C

Recommended Printing Parameters

Nozzle (Extrusion) Temperature: 210 °C - 240 °C (Recommended baseline: 220 °C)
Heated Bed Temperature: 35 °C - 45 °C
Recommended Printing Speed: Max 200 mm/s (Slower speeds highly optimized for uniform color layout and deeper gloss intensity)
Compatible Build Surfaces: Textured PEI Plate, Smooth PEI Plate, Cool Plate
Cooling Fan Speed: 100% (Maximum cooling for fine detail over multi-color shifts)

Hardware Compatibility & Eco-System

Package Type: Full Spool Package (Includes 1 x Genuine Bambu Reusable Spool made of high-temperature resistant ABS up to 70 °C)
Smart Detection: Built-in active RFID chip automatically syncs exact multi-color profile, material parameters, and optimized speed settings with Bambu Lab AMS systems upon loading.
Nozzle Hardware: Recommended for 0.4 mm Stainless Steel or Hardened Steel nozzles (Not recommended for 0.6 mm or 0.8 mm nozzles to maintain high surface gloss details).

Storage & Drying Guidelines

Drying Requirements: Blast drying oven at 55 °C for 8 hours, or Bambu X1/P1 series heatbed at 65 °C - 75 °C for 12 hours.
Storage Environment: Highly hygroscopic; must be kept in a sealed container or AMS system at < 20% RH with fresh desiccant to preserve surface properties.