Every week we get the same question: I am putting together a gaming PC, what should I buy? Most people obsess over the CPU and the graphics card and forget the two parts that decide how the build looks, how long it lasts and how quiet it stays: the case and the RAM. A case is not just a metal box you drop parts into, it is the whole airflow path. A choked case means higher temperatures, fans screaming, and performance sliding in long sessions. RAM is what keeps the game smooth while Discord, a browser and a stream are all running at the same time.
Since any build splits its budget across a lot of parts, the goal is not to buy the most expensive of everything, it is to spread the money properly: a case that breathes, memory with enough capacity and speed to last you years, and the rest into the CPU and GPU. In this guide we walk through the selection criteria step by step, then show you options that are genuinely in stock so you do not waste time chasing parts that are hard to find in Iraq.
How to choose: the criteria that matter
- Compatibility first: make sure the case accepts your motherboard size (ATX, Micro-ATX or Mini-ITX). A Mid-Tower usually covers most boards while staying a reasonable size on a desk.
- Airflow: a mesh or open front pulls in far more cool air than a sealed glass panel. With a hot graphics card and Iraqi summer heat, breathing beats looks every time.
- Bundled fans: a case that ships with three or four fans saves you a separate purchase. A case with a single fan means more spending later.
- Clearances: measure your GPU length and CPU cooler height before buying, and if you are going liquid cooling, check which radiator size the case supports.
- Cable management: room behind the motherboard tray makes the build cleaner and the air move better. And with a tempered glass (TG) case everything inside is on display, so route those cables neatly.
- Buy RAM as a kit, not a single stick: always go for a two-stick kit so it runs in dual channel. A lone stick costs you real gaming performance, especially on modern CPUs.
- Speed and latency: with DDR5, 6000MHz paired with a low CL number is the sweet spot for most builds. The gap between CL30 and CL36 is real but not dramatic in games.
- XMP and EXPO: these are profiles that let the memory run at its rated speed with one click in the BIOS. Without enabling them your RAM runs slower than what you paid for.
- Capacity: pure gaming is comfortable on 32GB today; add streaming, video editing or design software and 64GB buys you years of headroom.
Corsair iCUE 220T RGB Airflow — a balanced starting point
A Corsair Mid-Tower with an Airflow front designed to pull in more air, plus built-in RGB lighting controlled through the iCUE software. It suits anyone who wants a clean-looking build without sacrificing cooling, and it is one of those mid-range cases you see in countless finished builds. Available in black and white, so you can match your desk theme.
MSI MAG PANO M100R PZ — a panoramic view for sensible money
The PANO name comes from the panoramic front: glass on the front and the side so your parts are visible from two angles, which matters a lot if the machine sits on your desk rather than under it. It belongs to the MAG family known for balancing price against build quality, and it is one of the more affordable options in the MSI case lineup. If you are buying lit-up RAM and colourful fans, this case puts all of it on show.
Cooler Master HAF 500 — airflow first and last
HAF stands for High Air Flow, Cooler Master's line built specifically around high airflow. This version arrives with three fans already installed, so buying the case settles the fan question at the same time. It is a strong pick if your build has a hot graphics card or a CPU that runs long, heavy loads, or if your room is not air-conditioned around the clock. The white finish also looks tidy alongside white memory and fans.
ASUS A31 PLUS — four ARGB fans included
The biggest strength here is that it ships with four ARGB fans, so you get cooling and lighting in one purchase with no extra accessories to buy. That makes it ideal for a first gaming build that should look finished from day one, and it saves a decent amount that would otherwise go on separate fans. Offered in black, with a white PLUS version if your theme is light.
Thermaltake CTE E550 TG — more space, more air
Thermaltake's CTE series is built around rearranging where the fans sit so air takes a better path through the case, and the TG letters mean tempered glass. It is a Mid-Tower but roomy inside, which makes assembly and cable routing easier and leaves more clearance for long cards. The Snow white finish is the cleanest looking of the bunch, and other colours such as Gravel Sand and Matcha Green exist if you want something beyond the usual black and white.
G.SKILL Trident Z5 RGB DDR5 64GB (2x32GB) 6000MHz CL36 — the balanced pick
A two-stick kit of 32GB each, running at 6000MHz with CL36 latency, supporting both XMP and EXPO so it hits full speed with one BIOS toggle whether your board is Intel or AMD. The Trident Z5 RGB line is known for its distinctive shape and top-mounted lighting, and it shows up in plenty of showcase builds. 64GB is more than games alone need, but if you stream, play and edit video, it is an investment that stays relevant for years.
TEAMGROUP T-Force Delta RGB DDR5 64GB (2x32GB) 6000MHz CL38
Another DDR5 kit at roughly the same capacity and speed, with CL38 latency, from the T-Force Delta line known for its wide light bar that covers the whole face of the stick — one of the nicest looks behind a glass panel. The difference against CL36 or CL30 kits shows up more in benchmark numbers than in how a game actually feels, so if the price gap matters to you, this is a practical, smart choice.
G.SKILL Ripjaws S5 DDR5 64GB (2x32GB) 6000MHz CL36 — no lighting, less height
This kit comes from the Ripjaws S5 line and its name mentions no RGB at all, which is exactly why you would pick it: a quiet, low-profile design that helps when a large CPU cooler crowds the memory slots. All the specs that matter are still there — two 32GB sticks, 6000MHz, XMP and EXPO support. If your machine lives under the desk or lighting simply is not your thing, you are paying for performance instead of looks.
The bottom line: putting it all together
To sum it up in two lines: start with a case that breathes and fits your board and card length, then pick a two-stick DDR5 kit at 6000MHz and do not forget to enable XMP or EXPO in the BIOS, otherwise it runs below its potential. Do not buy extra fans if the case already includes four, and do not pay for lighting if the machine is going under the desk. Whatever you save here, put it into the graphics card, because that is what raises your frame rate in the end.
Everything listed above is available at Jowa Al-Souq with delivery to every province in Iraq and cash on delivery. If you are torn between two options, message us with your motherboard and graphics card model and we will help you pick the right fit for your build.
